Skip to content
View Full UAS Schedule

2014 Spring Classes

CT Construction Technology

CT 100
3 CR
Introduction to woodworking and woodworking machines; project construction and general finishing procedures.
CRN SECTION INSTRUCTOR MEETS
39198 J01 Pete Traxler
Technical Ed Center 125
Tuesday
6:00p - 10:45p
1/13 - 5/3

No notes

Tuition and fees: $668 (additional charges may apply)

Overview of construction hand and power tool usage, building procedures and codes, job and site planning, layout, foundation, floor wall, and roof framing methods, utilizing current construction practices.
CRN SECTION INSTRUCTOR MEETS
40165 J01 Alan Jones
Technical Ed Center 140
Tue, Wed, Thu
1:40p - 4:15p
1/21 - 3/6
Technical Ed Center 139
Tue, Wed, Thu
1:40p - 4:15p
1/21 - 3/6

No notes

Tuition and fees: $618 (additional charges may apply)

CT 135
3 CR
Hands-on class on the basic electrical requirements of the National Electric Code (NEC) and local codes as they apply to planning and installing circuits in a residential dwelling. Electrical codes and safety are emphasized along with wire sizes and wiring circuit drawings.
CRN SECTION INSTRUCTOR MEETS
36485 J01 Stephen Davis
Technical Ed Center 139
Saturday
8:00a - 4:15p
1/13 - 2/8
Technical Ed Center 140
Saturday
8:00a - 4:15p
1/13 - 2/8
Technical Ed Center 139
Mon, Wed
6:00p - 9:10p
1/13 - 2/8
Technical Ed Center 140
Mon, Wed
6:00p - 9:10p
1/13 - 2/8

No notes

Tuition and fees: $678 (additional charges may apply)

A hands-on introduction to residential plumbing and heating. Basic drain/waste/vent (DWV), cold and hot water supply systems and an overview of heating systems are covered. Includes up-to-date materials, code requirements, system requirements and design.
CRN SECTION INSTRUCTOR MEETS
36486 J01 Shawn Williams
Technical Ed Center 139
Saturday
9:00a - 3:30p
3/24 - 4/19
Technical Ed Center 139
Mon, Wed
6:00p - 9:30p
3/24 - 4/19

No notes

Tuition and fees: $678 (additional charges may apply)

CT 155
3 CR
Special methods in wood construction and wood finishing, emphasizing furniture and precision woodcraft.
CRN SECTION INSTRUCTOR MEETS
36586 J01 Pete Traxler
Technical Ed Center 125
Tuesday
6:00p - 10:45p
1/13 - 5/3

Prerequisite: CT S100.

No notes

Tuition and fees: $668 (additional charges may apply)

CT 181
3 CR
Develops intermediate level CADD (computer-aided design drafting) skills for architectural, civil, structural, mechanical and electrical drawings used in building construction.
CRN SECTION INSTRUCTOR MEETS
36490 J01 Robin Gilcrist
Technical Ed Center 212
Wednesday
6:00p - 9:45p
1/13 - 5/3

Prerequisite: CT S175 or instructor permission.

No notes

Tuition and fees: $618 (additional charges may apply)

Identify the hidden flaws often found in residential buildings that can cause discomfort, high energy costs, moisture and indoor air quality problems. Lectures will concentrate on theory, performance analysis and diagnostic testing methods for residential buildings. Lab sessions will focus on using a blower door, pressure measuring devices, flow hoods and analysis software.
CRN SECTION INSTRUCTOR MEETS
36587 J01 Randall Walling
Technical Ed Center 139
Monday
1:00p - 5:00p
1/13 - 4/7
Technical Ed Center 140
Monday
1:00p - 5:00p
1/13 - 5/3
Technical Ed Center 212
Monday
1:00p - 5:00p
1/13 - 5/3
Technical Ed Center 139
Monday
1:00p - 5:00p
4/21 - 5/3

Corequisite: CT S201 or instructor permission.

No notes

Tuition and fees: $668 (additional charges may apply)

Design, construction and basic building science for understanding, planning, and constructing a durable home in a cold climate. Upon satisfactory completion, this course meets the prerequisite for the State of Alaska Contractor Residential Endorsement and also for 16 continuing education credits by the State of Alaska, Division of Occupation Licensing for General Contractors with Residential Endorsement.
CRN SECTION INSTRUCTOR MEETS
36491 J01 Robin Gilcrist
Technical Ed Center 212
Thursday
6:00p - 9:00p
1/13 - 5/3

No notes

Tuition and fees: $618 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39537 JD1 Robin Gilcrist
DIST WEB
1/13 - 5/3

Contact the Career Education department for more information, (907) 796-6151.

Tuition and fees: $618 (additional charges may apply)

CT 213
3 CR
Advanced application of mechanical, electrical, civil and structural graphic standards using AutoCAD. Orthographic projections, auxiliary views, sectional views, and dimensioning are included topics.
CRN SECTION INSTRUCTOR MEETS
36588 J01 Robin Gilcrist
Technical Ed Center 212
1/13 - 5/3

Prerequisite: CT S181.

For course information, contact the Career Education office at (907) 796-6141.

Tuition and fees: $618 (additional charges may apply)

Overview of organizing and planning for on-site construction. A review of building codes, ordinances, contracts and related information as regarding scheduling and managing a project.
CRN SECTION INSTRUCTOR MEETS
39199 J01 Catherine Fritz
Technical Ed Center 212
Monday
6:00p - 9:00p
1/13 - 5/3

No notes

Tuition and fees: $618 (additional charges may apply)

Study and application of materials, methods, and codes of construction specifically related to wood structures. Development of details and a complete set of working drawings using AutoCad.
CRN SECTION INSTRUCTOR MEETS
36495 J01 Robin Gilcrist
Technical Ed Center 212
Tuesday
6:00p - 9:45p
1/13 - 5/3

Corequisite: CT S181.

No notes

Tuition and fees: $618 (additional charges may apply)

 
View Full UAS Schedule

2014 Summer Classes

 
View Full UAS Schedule

2014 Fall Classes

CT Construction Technology

CT 100
3 CR
Introduction to woodworking and woodworking machines; project construction and general finishing procedures.
CRN SECTION INSTRUCTOR MEETS
79755 TP1 Colin Dukes,
Kimberly Szczatko
9/2 - 12/13

No notes

Tuition and fees: $180 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
79756 TP2 Kimberly Szczatko,
Albert Tingley
9/2 - 12/13

No notes

Tuition and fees: $180 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
79757 TP3 Nicholas Popp,
Kimberly Szczatko
OT PETE
9/2 - 12/13

No notes

Tuition and fees: $180 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
79758 TP4 Michael Cleary
OT KLAW
9/2 - 12/13

No notes

Tuition and fees: $180 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
81198 TP5 Andrew Larrabee,
Kimberly Szczatko
OT WRAN
9/2 - 12/13

No notes

Tuition and fees: $180 (additional charges may apply)

Overview of construction hand and power tool usage, building procedures and codes, job and site planning, layout, foundation, floor wall, and roof framing methods, utilizing current construction practices.
CRN SECTION INSTRUCTOR MEETS
79759 J01 Justin Fantasia
Technical Ed Center 139
Tue, Wed, Thu
5:30p - 9:30p
9/2 - 10/1
Technical Ed Center 125
Tue, Wed, Thu
5:30p - 9:30p
9/2 - 10/1
Technical Ed Center 140
Tue, Wed, Thu
5:30p - 9:30p
9/2 - 10/1

No notes

Tuition and fees: $742 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
80994 T01 Patrick Hughes
SC HANGAR
Mon, Wed
6:00p - 8:30p
9/22 - 12/13

No notes

Tuition and fees: $607 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
81652 T80 Patrick Hughes
SC HANGAR
Mon - Fri
11:05a - 12:35p
8/25 - 10/17

For MEHS high school students ONLY.

Overview of construction hand and power tool usage, building procedures and codes, job and site planning, layout, foundation, floor wall, and roof framing methods, utilizing current construction practices.
CRN SECTION INSTRUCTOR MEETS
79760 TP1 Andrew Bullick,
Kimberly Szczatko
Juneau-Douglas High School HS
9/2 - 12/13

No notes

Tuition and fees: $180 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
79761 TP5 Andrew Larrabee,
Kimberly Szczatko
OT WRAN
9/2 - 5/5

No notes

Tuition and fees: $180 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
81914 TP4 Michael Cleary,
Kimberly Szczatko
OT KLAW
9/2 - 5/2

No notes

Tuition and fees: $180 (additional charges may apply)

CT 135
3 CR
Hands-on class on the basic electrical requirements of the National Electric Code (NEC) and local codes as they apply to planning and installing circuits in a residential dwelling. Electrical codes and safety are emphasized along with wire sizes and wiring circuit drawings.
CRN SECTION INSTRUCTOR MEETS
82127 T80 Patrick Hughes
SC HANGAR
Mon - Fri
11:05a - 12:35p
8/25 - 10/17

No notes

CT 155
3 CR
Special methods in wood construction and wood finishing, emphasizing furniture and precision woodcraft.
CRN SECTION INSTRUCTOR MEETS
79762 TP1 Colin Dukes,
Kimberly Szczatko
Juneau-Douglas High School HS
9/2 - 12/13

Prerequisite: CT S100.

No notes

Tuition and fees: $180 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
81199 TP2 Kimberly Szczatko,
Albert Tingley
TMHS
9/2 - 12/13

Prerequisite: CT S100.

No notes

Tuition and fees: $180 (additional charges may apply)

Covers basic architectural drafting and residential design. Students will learn to read a set of house plans, complete a conceptual design for a house following current International Residential Codes, will understand standard building practices for a cold maritime climate, and will be aware of green building practices.
CRN SECTION INSTRUCTOR MEETS
79763 J01 Robin Gilcrist
Technical Ed Center 212
Wednesday
6:00p - 9:00p
9/2 - 12/13

No notes

Tuition and fees: $642 (additional charges may apply)

An introduction to computer aided design and drafting using the industrial standard AutoCAD software. Includes the basics of computer hardware and software, computer skills required for creating and editing drawings.
CRN SECTION INSTRUCTOR MEETS
79764 J01 Robin Gilcrist
Technical Ed Center 212
Tuesday
6:00p - 9:45p
9/2 - 12/13

Stacked: This class is stacked with 77566 CT 181. Students registered in CT 181 cannot register for CT 175.

No notes

Tuition and fees: $677 (additional charges may apply)

CT 193
3 CR
CRN SECTION INSTRUCTOR MEETS
82128 T80 Patrick Hughes
SC HANGAR
Mon - Fri
11:05a - 12:35p
8/25 - 10/17

No notes

Design, construction and basic building science for understanding, planning, and constructing a durable home in a cold climate. Upon satisfactory completion, this course meets the prerequisite for the State of Alaska Contractor Residential Endorsement and also for 16 continuing education credits by the State of Alaska, Division of Occupation Licensing for General Contractors with Residential Endorsement.
CRN SECTION INSTRUCTOR MEETS
79766 J01 Robin Gilcrist
Technical Ed Center 212
Thursday
6:00p - 9:00p
9/2 - 12/13

No notes

Tuition and fees: $642 (additional charges may apply)

Skill development in contemporary methods of building construction.
CRN SECTION INSTRUCTOR MEETS
79767 J01 Justin Fantasia
Technical Ed Center 125
Tue, Wed, Thu
5:30p - 9:30p
10/2 - 11/4
Technical Ed Center 140
Tue, Wed, Thu
5:30p - 9:30p
10/2 - 11/4
Technical Ed Center 139
Tue, Wed, Thu
5:30p - 9:30p
10/2 - 11/4

Prerequisite: CT S120.

No notes

Tuition and fees: $742 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
81654 T80 Patrick Hughes
SC HANGAR
Mon - Fri
11:05a - 12:35p
10/20 - 12/19

Prerequisite: CT S120.

For MEHS high school students ONLY.

Skill development in contemporary methods of building construction.
CRN SECTION INSTRUCTOR MEETS
81915 TP4 Michael Cleary,
Kimberly Szczatko
OT KLAW
9/2 - 5/2

Prerequisite: CT S120.

No notes

Tuition and fees: $180 (additional charges may apply)

Advanced skill development in interior and exterior finish carpentry and cabinet making.
CRN SECTION INSTRUCTOR MEETS
79768 J01 Justin Fantasia
Technical Ed Center 140
Tue, Wed, Thu
5:30p - 9:30p
11/5 - 12/9
Technical Ed Center 139
Tue, Wed, Thu
5:30p - 9:30p
11/5 - 12/9
Technical Ed Center 125
Tue, Wed, Thu
5:30p - 9:30p
11/5 - 12/9

Prerequisite: CT 120.

No notes

Tuition and fees: $742 (additional charges may apply)

Interpretation of construction drawings and specifications; estimating overhead and profit; review of subcontractor and material suppliers' proposals.
CRN SECTION INSTRUCTOR MEETS
79769 J01 Pete Traxler
Technical Ed Center 212
Friday
1:00p - 4:00p
9/2 - 12/13

No notes

Tuition and fees: $642 (additional charges may apply)

Specifically designed to meet the needs of contractors and designers of new residential buildings to provide a comprehensive overview of the details involved in designing, installing, and commissioning residential ventilation systems. Heating, Refrigeration and Air Conditioning Institute of Canada, SkillTech Academy certification for Residential Ventilation Installation and 14 continuing education credits from the State of Alaska, Division of Occupational Licensing for General Contractors with a Residential Endorsement.
CRN SECTION INSTRUCTOR MEETS
79808 J01 Pete Traxler
Technical Ed Center 139
Monday
1:00p - 4:00p
9/2 - 12/13
Technical Ed Center 140
Monday
1:00p - 4:00p
9/2 - 12/13

No notes

Tuition and fees: $692 (additional charges may apply)

CT 293
3 CR
CRN SECTION INSTRUCTOR MEETS
82129 T80 Patrick Hughes
SC HANGAR
Mon - Fri
11:05a - 12:35p
10/20 - 12/19

No notes

 
 
 

Content maintained by School of Career Education.